Car lubricants are used very frequently during maintenance. In addition to protecting the engine and reducing the number of oil changes, high-quality lubricating oil can also save gasoline costs. In this season, we must also be careful not to cause car breakdowns due to improper use of lubricants. The “improper” use method generally stems from the four “misunderstandings” of car friends about lubricants.
Misunderstanding XNUMX: Add more lubricating oil
The amount of lubricating oil should be controlled between the upper and lower marks of the oil dipstick.Because too much lubricating oil will escape from the gap between the cylinder and the piston into the combustion chamber and burn to form carbon deposits.These coke deposits increase the compression ratio of the engine and increase the tendency to knock; the coke deposits in the cylinder are red hot and easily cause pre-ignition. If they fall into the cylinder, they will aggravate the wear of the cylinder and piston, and will also accelerate the pollution of the lubricating oil.Secondly, too much lubricating oil increases the stirring resistance of the crankshaft connecting rod and increases fuel consumption.
Misunderstanding XNUMX: When the lubricating oil turns black, it is time to change the oil
This understanding is not comprehensive.For lubricating oils that have not been added with a quiet dispersant, the darkening of the color is indeed a sign that the oil has been seriously deteriorated, but the lubricating oil used in modern cars is generally added with a quiet dispersant.This cleanser will wash off the rubber film and black carbon deposits adhering to the piston and disperse it in the oil to reduce the generation of high-temperature deposits in the engine. Therefore, the color of the lubricating oil is likely to turn black after using for a period of time, but at this time The oil has not completely deteriorated.
Misunderstanding XNUMX: Lubricating oil is often added and not changed
It is correct to check the lubricating oil frequently, but only supplementing without replacing it can only make up for the lack of oil quantity, but cannot fully compensate for the loss of lubricating oil performance.During the use of lubricating oil, the quality will gradually decline due to pollution, oxidation and other reasons, and at the same time there will be some consumption, which reduces the quantity.
Misunderstanding XNUMX: Additives are useful
The real high-quality lubricants are finished products with multiple engine protection functions. The formula contains a variety of additives, including anti-wear agents, and the lubricant* pays attention to the balance of the formula to ensure the full play of various performances. Adding other additives on your own will not only not bring additional protection to the vehicle, but will easily react with the chemicals in the oil.
The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.
Link to this article：Inventory of four common misunderstandings in the use of lubricating oil
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank