Nowadays, many companies use laser pipe cutting machines for cutting operations. Among them, the use of laser cutting equipment to cut round holes is common. However, as the requirements for cutting accuracy begin to increase, there are also many needs to pay attention to when cutting operations. Today, let’s talk about specific precautions.
First, when using a laser pipe Cutting Machine to cut round holes, the first thing to pay attention to is that when round holes are cut, a one-to-one cutting scheme is naturally the best, and usually the size of the hole is inversely proportional to the difficulty. Yes, when the aperture requirement is larger, the natural difficulty becomes smaller. It is necessary to judge whether the cutting range of the laser pipe cutting machine we use is satisfied, otherwise insufficient capacity will result in irregular round holes and too many break points. .
Second, when using a laser pipe cutting machine for round holes, you should also pay attention to the problem of gas pressure. When the gas pressure is too large or too small, the cutting operation is often not possible because the pressure is too small. The cutting edge will be rough, and the pressure is very dangerous. Therefore, when using the laser pipe cutting machine, you must always pay attention to the pressure problem.
Third, it should be debugged before using the laser pipe cutting machine for cutting operations. It is usually debugged with waste materials, and the operators should also be professionally trained, because the operation level of the laser pipe cutting machine is also It will affect the final cutting effect. Only when the accuracy range of the equipment meets the requirements and the skilled operator can cut the round hole we want, and always pay attention to the maintenance of the laser pipe cutting machine.
What I just mentioned is what you need to pay attention to when using a laser pipe cutting machine to cut round holes. In fact, because different cutting machines have different functions, some are completely computer-operated cutting, so the specific precautions are also different, but All of these mentioned just now must be paid attention to, so as to ensure the best effect of the cutting operation.
Link to this article：Precautions for laser pipe cutting machine for round hole operation
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cut Wiki，Thanks!^^