Why is metal stamping dangerous?

  • 1. During the metal stamping process, for the sake of safety, pay attention to the adjusting screw of the slider and don’t let it extend too long. In the processing of metal stamping parts, in order to prevent the mold from moving, a layer of paper can be added during reinforcement. The rotation of the mold is a very dangerous situation. For the safety in the processing of metal stamping parts, the disassembly of the mold must wait until the machine is completely stopped before operation.
  • 2. When metal stamping parts are processed, if you need to adjust and install the mold, you must first turn off the power supply. Although it can be done without turning off the power supply, the risk index will greatly increase. Therefore, for safety, the power supply must be completely Turn off the machine and perform operations after it has completely stopped running.
  • 3. In the processing of metal stamping parts, the existence of fastening screws will have a certain protective effect on the processing safety of metal stamping parts. In order to prevent this protection from becoming a hidden danger, the fastening screws must be fastened frequently to ensure that they are fastened. Screws can play a safety function.

Link to this article:Why is metal stamping dangerous?

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Stamping Wiki,Thanks

Related Posts